// Contact our sales team

* Required

Cost Effective and Secure Installation

The structure of the MX 62 system has been developed to provide redundancy. Reliable data is passed quickly from the detectors to the relays.

Structured programming

The ConfigPro.exe software configures the MX 62 through a secure, password protected interface.

Saves Space and Optimizes Cost

Innovative design meets the new safety requirements

Modularity allows a personalized operation and custom wiring

Flexibility allows better integration with your system

High reliability ensures minimum maintenance

Programmable outputs reduce relay requirements

LED Module (A)
16 channels (8 channels standard)
LCD Module (B)
Up to 30 displays can be networked with the MX 62, allowing anywhere/anytime measurement display
Printer Module (C)
CPU Module (D)

4 alarm thresholds


Power “on”


Graphic, alphanumeric, high definition LCD

User-friendly display graphics

Data storage: (optional 5 days)

Can be remote via RS 485

Printing alarms, relay operating status, fault, min/max average over 8 hours

Type ASCII, alphanumeric 40 or 80 characters

Parallel connection

The CPU module is the heart of the system, with backup power supply and two processors.

Plug in the LED and LCD modules, or remote connection via RS485 (4 wires + shield).
Analog input Module (E)
Analog signals from the detectors to be input into the control system. Dual converters ensure reliable and redundant operation.
Adapter Module (F)
Relay Module (G)
Analog Output Module (H)
Communication Module (I)
Optional communication splitter module available

Centralized management

Connection to different modules

Connection to an internal or external printer

Direct connection with the MX 62 system or remote via the adapter module

Up to 8 measurement points, 2 or 3 wire

Allows 3 operating modes :Up to 16 addressable detectors in a loop configuration

Up to 8 addressable detectors combined with a remote analog module

Connection of 2 analog input modules

The module can be remote via 2 RS485 networks (2 x 4 wires + screened system)

Fitted with 2 processors linked with the CPUPrincipal module: 8 relays

Extension module: 8 relays

NO/NC contacts

Breaking capacity: 460 VA, 60 W

Positive safety individually programmable

The module can be remote via 2 RS485 (2 x 4 wires + screened system)

Fitted with 2 processors linked with the CPUFitted with 8 analog 4-20 mA or 0-10 V outputs

Each output is programmed to transmit:

The real time value for one each input

The linearized value

Means or max for a detector group

Mimic module: open collector (56) suitable to drive LED mimic panel as per MX 62 channel

Link to a supervisor for data exportation (PLC, DCS or SCADA)

Link with CPU via the RS 232

Personalized or Modbus protocol via RS 422

-SIL3 and SIL2 according to EN50402:2006 and IEC61508:2011 -Up to 64 secured channels for direct or network wiring -Direct network and loop connection -Redundancy from measurement to alarm relays -Functions AND, OR, MIN, MAX, Voting

Related Products